Threshold S300 Manual
For sale is a Threshold S/300 Series II Stasis Linear State Power Amplifier with it's original manual. This amp has been gone through by our techs and is in perfect working condition. It is cosmetically great condition with one small scratch at the front of the top plate (see photos for details). This is a great sounding amplifier that will pair well with most hifi systems.
Threshold S300 Manual
Need a manual for your Threshold S/300 Stasis Amplifier? Below you can view and download the PDF manual for free. There are also frequently asked questions, a product rating and feedback from users to enable you to optimally use your product. If this is not the manual you want, please contact us.
auto-port-defend protocol arp-reply threshold threshold
undo auto-port-defend protocol arp-request threshold [ threshold ]
After port attack defense is enabled on a port, the device calculates the rate of affected protocol packets received by the port. If the packet rate exceeds the protocol rate threshold, the device considers that an attack occurs. Then the device traces the source and limits the rate of attack packets on the port, and records a log. The device moves the packets within the protocol rate limit (CPCAR in attack defense policies) to the low-priority queue, and then sends them to the CPU.Port Attack Defense The device discards the excess packets.
You need to set an appropriate rate threshold for port attack defense according to service requirements. If the CPU fails to process many protocol packets promptly after port attack defense is enabled, set a large packet rate threshold. If the CPU is busy processing the packets of a protocol, set a small rate threshold for this protocol to avoid impact on other services.
Each firmware behaves differently and depends on the type of bed leveling that's been configured. For example, Marlin 1.0.2 provides 3 different types of automatic bed leveling (probe required) and a manual bed leveling option. See your firmware's documentation for the specific options available.
Marlin firmware (version 1.1.0 and later) includes the AUTO_BED_LEVELING_UBL option for Unified Bed Leveling. UBL combines mesh leveling, tilted plane adjustment, 3-point leveling, and manual editing tools all together in a single package. To accomplish so much, UBL overloads `G29` with several new parameters and provides an additional G26 Mesh Tuning feature.
Repetier firmware since v0.91 supports G29 with the optional Snnn parameter as described below. Useful to simply detect the Z bed angle so you can manually readjust your bed and get it as close to in plane as possible. If you wish to apply automatic software Z plane compensation on Repetier, use G32 instead with firmware 0.92.8 and above.